header

 

- High performance - Energy efficient - T5 High Bay - Commercial luminaire -

  • Up to 50% energy savings using four 54w T5 amalgam lamps - calculate your cost savings
  • Includes 3m adjustable fast fix wire suspensions
  • Light levels and distribution equal to 400W metal halide achieved through unparalleled optical performance and lower lumen depreciation over the life of the lamp
  • 6 months return on additional investment through energy savings
  • 6 years lamp life (24,000 hour rated life)
  • Full light output from 10° to 50°C
  • Made in New Zealand 

 

Click here to find out where you can buy High Five... 

 

Typical Applications
High Five is designed for any mounting height from 3 metres to over 12 metres where a 400w metal halide would typically be used, this includes: warehouses, distribution centres, workshops, print houses, retail or manufacturing spaces, gyms and rec centres.

 

Need High Five with a lens?

When the High Five is installed in a food service area or anywhere a lamp breakage must be contained the HFS454LN is fitted with a 3mm polycarbonate lens, side rails and dust covers, a perfect alternative to Metal Halide with lens. T5 fluorescent has the added benefit that the lamps can only be broken through impact, there is no chance of a catastrophic end of life failure.

 

Download HFB454LN specification sheet

 

Need High Five with a Wire Guard?

When installed in a gymnasium or sports centre the HFS454WGF can be fitted with a wire guard to protect the fixture from impact. Either suspension or or surface mount wire guards are available. Surface mount is reccommended fpr sports centres as impact is transferred to the ceiling not the luminaire


 

Download HFB454WG specification sheet

 

High Five T-Rail Kit
High Five T-Rail kit is a stylish accessory allowing the standard High Five to be mounted flush within a standard T-rail ceiling. Comprised of a white steel frame and two gloss steel in-fill panels the T-Rail kit is very simple to install, for more information download the spec sheet from the Technical information page. High FIve - T-Rail Kit 4W

 

Lamps
High Five features amalgam lamps producing full light output over the temperature range commonly found in high bay applications such as warehouses, distribution centres, workshops or any space with a high mounting height. For more information on amalgam lamps click here...

 

Reflector

 
 
Optical performance of High Five is achieved through the nature of T5 and luminaire design, coupled with the exclusive use of multi faceted Alanod Miro4. The highly specular reflective Miro4 is roll formed in a unique way (Multi faceted) designed specifically for a T5 lamp.

 

Electronic Control Gear

 

  

Vossloh Schwabe (VS) supply quality electronic control gear to ensure flicker free light, greater ECG longevity, and intelligent control of T5 fluorescent lamps

 

Made in New Zealand

 

  
  High Five is a certified Buy New Zealand Made Luminaire and installed in a variety of buildings throughout the country and exported to Australia. 


Download a copy of the High Five Brochure

 

 400W metal halide Vs High Five linear fluorescent performance comparison

                             
Luminaire
 400w MHI High Five
Power Consumption 460w 230w
Instant on/off No Yes
Colour Rendering Poor
 Very good (80-90Ra)
Light flicker Poor Very good (40Khz)
Mercury Levels High
Very Low (2.5 - 3mg/lamp)

 

For more information visit the High Five technical page or our FAQ's